ROSCO Off Broadway White, 1l.
ROSCO Off Broadway White, 1l.
Tuotekoodi: 150053500032
Kysy saatavuus
Toimituskulut alkaen 9,00 €
Tai nouto myymälästä 0 €
65,00 €
81,58 € (ALV 25.50 %)
ROSCO Off Broadway White 1 litra
Off Broadway on yksi Roscon suosituimmista maisemamaaleista. Täyteläisten, tasaisten teatterivärien paletti joustavassa vinyyliakryylisideaineessa tekee Off Broadway -maalista täydellisen melkein mihin tahansa maisemalliseen tai taiteelliseen sovellukseen. Off Broadwayta voidaan käyttää suoraan tölkistä tai laimentaa vedellä. Off Broadwayta voidaan käyttää monilla suosituilla alustoilla, joita käytetään näyttämötaidossa, mukaan lukien musliini, puu, metallit, seinälevy ja monet muovit.
Off Broadway on yhteensopiva kaikkien muiden Rosco Scenic Paints -maalien kanssa.
Saatavana 27 taiteilijavärissä ja 5 metallivärissä.
Off Broadway on yksi Roscon suosituimmista maisemamaaleista. Täyteläisten, tasaisten teatterivärien paletti joustavassa vinyyliakryylisideaineessa tekee Off Broadway -maalista täydellisen melkein mihin tahansa maisemalliseen tai taiteelliseen sovellukseen. Off Broadwayta voidaan käyttää suoraan tölkistä tai laimentaa vedellä. Off Broadwayta voidaan käyttää monilla suosituilla alustoilla, joita käytetään näyttämötaidossa, mukaan lukien musliini, puu, metallit, seinälevy ja monet muovit.
Off Broadway on yhteensopiva kaikkien muiden Rosco Scenic Paints -maalien kanssa.
Saatavana 27 taiteilijavärissä ja 5 metallivärissä.
Finish: Flat/Matte
Solvent: Water
Binder Type: Vinyl Acrylic
Dilution: May be used straight out of the can or diluted with water, Rosco Clear Acrylic Glaze or a combination of the two. Diluting will reduce the color concentration and create "glaze" effects. Diluting with more than 2 parts water may reduce binder strength. Add Rosco Clear Acrylic Glaze to restore adhesion and flexibility.
Surface Preparation: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.
Application: Stir contents well before each use. Do not shake. Apply by brush, roller or spray gun. Apply in thin, even coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
Film Thickness: 2 mil. Dry Film.
Coverage: Approximately 300 sq. ft. per gallon (28 sq. m per 3.79L), depending on substrate, application tool and film thickness.
Avg. Dry Time: At 75°F (24°C), dries to the touch in approximately 30-45 minutes. Can be recoated in 1-2 hours.
Clean-up: Soap and water.
Packaging: Quart (0.946L), 1 Gallon (3.79L). *5 Gallon (18.95L) available.
CAUTIONS: Do not apply when surface or air temperatures are below 50°F (10°C). Keep from freezing. Avoid prolonged contact with skin or breathing of spray. Do not take internally. Use adequate ventilation. KEEP OUT OF REACH OF CHILDREN.
Solvent: Water
Binder Type: Vinyl Acrylic
Dilution: May be used straight out of the can or diluted with water, Rosco Clear Acrylic Glaze or a combination of the two. Diluting will reduce the color concentration and create "glaze" effects. Diluting with more than 2 parts water may reduce binder strength. Add Rosco Clear Acrylic Glaze to restore adhesion and flexibility.
Surface Preparation: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.
Application: Stir contents well before each use. Do not shake. Apply by brush, roller or spray gun. Apply in thin, even coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.
Film Thickness: 2 mil. Dry Film.
Coverage: Approximately 300 sq. ft. per gallon (28 sq. m per 3.79L), depending on substrate, application tool and film thickness.
Avg. Dry Time: At 75°F (24°C), dries to the touch in approximately 30-45 minutes. Can be recoated in 1-2 hours.
Clean-up: Soap and water.
Packaging: Quart (0.946L), 1 Gallon (3.79L). *5 Gallon (18.95L) available.
CAUTIONS: Do not apply when surface or air temperatures are below 50°F (10°C). Keep from freezing. Avoid prolonged contact with skin or breathing of spray. Do not take internally. Use adequate ventilation. KEEP OUT OF REACH OF CHILDREN.
- Tuotekoodi: 150053500032
- Valmistaja: ROSCO
